大型升降平台通常情况下有台面大、承重大、升高大三种，不同的大，要注意的问题也不相同，下面有关技术人员就给大家介绍一下。

1、大型升降平台台面大：台面过大的话会造成货物摆放不聚中，造成的平台一侧倾斜，所以要注意在使用的时候把货物放置到中间的位置。
Too large, then the table will cause their goods do not gather, causing the platform side of the tilt, so be careful when using the placing of goods to an intermediate position.

2、大型升降平台承重大：承重大的设备在向上搬运重物的时候要注意物品的摆放，另外要注意使用时间的增加，平台的承重也会有所下降，所以要定期的测量平台的承重能力。
For major equipment when carrying heavy loads of up to pay attention to the placing of objects, in addition to pay attention to the increased use of time, the load-bearing platform will decline,so regular measurement platform load-bearing capacity.

3、大型升降平台升高大：升降高度较高的设备会造成设备的轴承的磨损加大，所以我们在使用的时候一定要注意定期的保养和检查，发现磨损过大的轴承要立即进行更换。
The height of the device will result in higher bearing wear devices increase, so we must use the time to pay attention to regular maintenance and inspection, found excessive wear of the bearings should be replaced immediately.

4、大型升降平台在使用的时候更要注意设备的稳定性和安全性，它的保养和检查要比普通的设备更为严格。
Use the time to pay attention to the stability and safety of the equipment, its maintenance and inspection of equipment is more stringent than the average.