安装固定式升降平台，需要有垂直的一个安装位置，来进行设备的安装。由于很多客户都是加装的升降平台，所以安装环境来讲一般都没有单独预留，很多时间都需要临时的进行处理的。下面就给大家分析一下固定式升降平台安装环境。

1、室内井道安装：这种是对于预留位置的客户，安装的时候有甚少两面的靠墙位置，相对比较安全，也比较方面。缺点是由于井道的位置限制，设备的导轨和油缸进出会十分的不方便，预留井道的客户在定制设备的时候要提前告知井道的尺寸，以方便进行定制。
This position is reserved for customers, there is very little time to install both sides of the wall position, relatively safe, but also more respect. The disadvantage is that due to the location restrictions hoistway, rails and equipment out of the cylinder will be very inconvenient, reserved hoistway customers to customize the device to be informed in advance when the size of the hoistway to facilitate customization.

2、室内切楼板安装：如果室外没有安装的位置，而室内又没有预留井道就要考虑切割楼板了。切割楼板要注意安装位置的大小，根据设备的大小进行切割，在切割的过程种不要发生偏离的现象。因为楼板是切割的，所以上下货的时候要注意楼板的承重性，可以考虑对四周进行加固。
If no location outdoor installation, while the interior has not reserved the hoistway should consider cutting the floor. Note that the size of the slab cutting installation position, according to the size of the device cut in the cutting process do not deviate species phenomenon. Because the floor is cut, so pay attention when the goods up and down the floor load bearing properties, could be considered for the four weeks reinforcement.

3、室外安装：升降平台室外安装要考虑到靠墙的问题，最好有靠墙的情况下再进行安装。如果没有靠墙的位置，则要考虑是否有安全的固定点，以防止设备没有固定稳定而造成的摇摆。
Outdoor installation should take into account the issue of the wall, there is the case of the best against the wall before installation. If there is no location of the wall, will have to consider whether there is a fixed point security to prevent the device does not have a fixed and stable swing caused.