1、保证正确的的操作顺序：提升时，吊笼上升，安全装置电磁铁延时动作，使抱刹斜块脱离立柱；下降时，先提升吊笼，当抱刹与立柱脱离后，上升停止，方可下降；停车时卷扬机制动受力，然后抱刹电磁铁断电，吊笼抱紧在立柱上；当发生断绳时，吊笼上断绳检测开关动作，致使抱刹电磁铁断电，吊笼制停在立柱上，制止坠落事故的发生。
Ensure the correct order of operations in Ningbo rail lifting platform: the ascent, rising cage, safety devices, solenoid delay action, so hold off brake ramp block column; when dropped, first lifting hoists, when the brake and hold off the post rose stop before declining; winch brake force when parking, and then hold the brake solenoid power, to hold fast in the column cage; when breakage occurs when the rope, hanging off the rope on the cage motion detection switch, resulting in brake hold electromagnet power, cage system to stop in the column, stop falling accident occurred.

2、导轨式升降平台保证刹车系统斜块与立柱间隙为20mm，如在使用过程中发现间隙过小，即液压升降平台吊笼运行过程中出现卡阻，应及时调整其间隙。以既保证吊笼上下运行通畅、又有较好的抱刹效果为原则。
Ningbo lifting platform rail ramp guarantee brake system and the column gap is 20mm, as found in the course of the gap is too small, jammed hydraulic lifting platform hoists that occurred during the operation, should adjust the gap. In order both to ensure the smooth running up and down the cage, there are better hold brake effect principle.

3、导轨式升降平台安全装置中电磁铁的牵引行程在15～20mm为宜，导轨式宁波升降平台使用过程中如发现水平杠杆弯曲，可调整电磁铁支架底座钢板的位置，以不与水平杠杆相碰为宜，以保证抱刹效果。
Ningbo lifting platform rail safety device electromagnet traction stroke 15 ~ 20mm is appropriate, rail Ningbo lifting platform level course found bent lever, adjust the position of the base plate of the solenoid bracket, so as not to be consistent with the level of leverage touch is appropriate to ensure that the holding brake effect.