重庆升降平台平时除了保养和维护以外，其实是避免不了老化的，而现在随着使用升降机的数量不断的增多，升降平台会出现一个维修的大潮，下面有关专家就给大家介绍一下升降平台老化怎么办？
　　
1、密封圈老化
升降平台最先老化的部件是密封圈，短则一年，慢则三年就需要更新换代一次，密封圈也称为油封，是液压固定式升降平台必备的配件。如果长时间不使用，密封件就容易出现老化，出现漏油的情况。密封件老化一般是由于周围的接触受力不均匀，时间长了就难以恢复，就要及时的更换了。
Ningbo lifting platform is the first part of aging seals, as short as one year, three years, you need to slow the replacement time, also known as ring seals, stationary hydraulic lifting platform necessary accessories. If not using the seal prone to aging, the case of oil spills occur. Seals aging generally due to the contact discontinuity around a long time will be difficult to recover,it is necessary and timely replacement.
　　
2、机件腐蚀
升降平台长时间放置，也会出现腐蚀、生锈的状况。特别是一些轴承部位，没有及时的保养和润滑，就会让钢材氧化，再次使用的时候就会使摩擦加剧，阻力变大，严重的时候会造成固定式升降平台无法使用。所以即使升降平台不使用，也要经常性的保养润滑，每个月拉出来升降几次。
Ningbo lifting platform place a long time, there will be corrosion, rust situation. In particular, some bearing parts, there is no timely maintenance and lubrication, will make steel oxidation,again, when will exacerbate the friction resistance becomes large, severe cases can cause fixed lifting platform can not be used. So even without the use of Ningbo lifting platform, but also regular maintenance lubrication, pull out the lift several times a month.
　　
3、输油管经常受到压力的向外作用力，所以在3年左右就会出现裂缝，和渗油的状况，有时还可能爆管，以及各个轴承，它们负责链接和运转各个部件的转化体，会承受很大的压力，也容易老化。
Pipelines are often under pressure outward force, so in about three years there will be cracks, and permeability of the situation, and sometimes may burst pipes, and each bearing, the body that are responsible for the conversion and operation of the various components of the link, it will bear very pressure, but also easy to aging.