重庆升降平台的升降系统和机器本身结构简单，且非常容易维护，升降平台的整个升降系统，是靠液压驱动来实现的，液压油箱的主要作用是为了储油、散热、分离油中所含空气及消除泡沫。所以为了不影响平时的工作，下面就给大家详细介绍一下应该如何选择邮箱。
 
1、需要考虑升降平台的油箱容量，升降平台没有一定的容量作为参考的保准，一般移动式设备取泵最大流量的2～3倍，固定式设备取3～4倍，基于这个标准，广大朋友可以选择性的选择油箱标准。
Fuel tank capacity to consider lifting platform Hangzhou, Hangzhou lifting platform without a certain capacity as a reference Guarantee, mobile devices generally take two to three times the maximum pump flow rate, fixed equipment to take 3 to 4 times, based on this standard, the majority of friends selection criteria can be selectively tank.

2、使用油箱需要有自己得一个限度，也就是需要设置油箱分界线，这样在低于这个零界点的时候能够自动发出提醒，提醒你进行充油或者是更改其他的设置，尽管如此，在选择升降平台这个临界点的时候也是需要有很大将就的，当系统全部液压油缸伸出后油箱油面不得低于最低油位，当油缸回缩以后油面不得高于最高油位。
Use the tank was a need to have their own limits, that is, you need to set the tank boundaries, so below this point when the zero bound can automatically send reminders to remind you to make oil-filled or change other settings, however, the choice of lift the critical point when the platform is also a great need will, and when the system is extended all the hydraulic oil tank must not fall below the minimum oil level when the oil level after retracting the cylinder shall not exceed the maximum oil level.

3、升降平台结构决定质量，所以考虑油箱的结构能够很大一部分彰显其所承载得容量，应沿油箱纵轴线安装一个垂直隔板，此隔板一端和油箱端板之间留有空位使隔板两边空间连通，液压泵的进出油口布置在不连通得一端隔板两侧，使进油和回油之间的距离最远，液压油箱多起一些散热作用。
Hangzhou lifting platform structure determines the quality, so consider the structure of the tank can highlight was a large part of its carrying capacity, install a vertical bulkhead along the longitudinal axis of the tank, leaving space between the end of the separator and the separator tank endplate connectivity on both sides of the space, the hydraulic pump oil inlet arranged in some cooling effect was not connected to one end of both sides of the bulkhead, and back into the oil so that the distance between the farthest oil, hydraulic oil tank more than.