重庆升降机使用时要控制油温，液压系统工作温度一般控制在30~80℃之间为宜，如果油的粘度降低，容易引起泄漏，效率下降；润滑油膜强度降低，加速升降机的磨损；生成碳化物和淤碴；油液氧化加速油质恶化；油封、高压胶管过早老化等。那么大家在使用时应该如何来控制油温呢？

1、升降平台使用时不要长期过载，注意散热器散热片不要被油污染，以防尘土附着影响散热效果，保持足够的油量以利于油的循环散热。
Wenzhou lifting platform when used long term do not overload, do not pay attention to the heat sink fins contaminated oil to prevent dust attachment of heat dissipation, keep enough fuel to facilitate the circulation of heat oil.
 
2、升降平台使用时要严格执行交接班制度，保证接班司机检查时的安全和检查到准确的油位。
Wenzhou lifting platform when used to strictly enforce the shift system to ensure safe and accurate inspection to check the oil level when the driver succession.

3、使用时检查升降平台系统是否渗漏、连接是否松动、活塞杆和液压胶管是否撞伤、液压泵的低压进油管连接是否可靠、油箱油位是否正确等，还要检查并清洁油箱通气孔，保持其畅通，以防气孔堵塞造成油箱真空，致使升降机液压油泵吸油困难而损坏。
Wenzhou lifting platform inspection system using leaks, the connection is loose, the piston rod and hydraulic hose is injured, the low pressure pump inlet pipe connection is reliable, fuel oil level is correct, etc., also check and clean the tank vent, maintain its flow, causing the tank to prevent clogging of the vacuum, resulting in a hydraulic lift pump suction difficulty and damage.