1、重庆升降平台在制造的时候要考虑好选择哪些合金进行制作，因为现在已经有许多耐腐蚀的合金，在普通钢铁中加入铬、镍等制成不锈钢，通过改变金属的内部组织结构来防锈。
Hangzhou freight elevator at the time of manufacture to be considered a good choice for the production of alloys which, because now there are a lot of corrosion-resistant alloys, adding chromium, nickel, etc. made of stainless steel in general, by changing the internal organizational structure of the metal to rust.

2、在货梯金属表面覆盖保护层，使金属制品与周围腐蚀介质隔离，从而防止腐蚀。在钢铁制件表面涂上机油、凡士林、油漆或覆盖搪瓷、塑料等耐腐蚀的非金属材料；用电镀、热镀、喷镀等方法，在钢铁表面镀上一层不易被腐蚀的金属。
In Hangzhou Huoti metal surface protective layer covering the metal corrosion products with the surrounding dielectric isolation, thus preventing corrosion. Steel parts coated with oil, Vaseline, paint or cover enamel, plastic and other corrosion-resistant non-metallic materials; plating, hot dip, spray and other methods, the steel surface coated with a layer of metal is not easily corrode.

3、使用电化学保护法，利用原电池原理进行货梯金属的保护，设法消除引起电化腐蚀的原电池反应。
Electrochemical protection law, the principle of using the original battery is protected Hangzhou freight elevator metal to try to eliminate the primary cause galvanic corrosion cell reaction.

4、对腐蚀介质进行处理。消除腐蚀介质，如经常揩净金属器材、在精密仪器中放置干燥剂和在腐蚀介质中加入少量能减慢腐蚀速度的缓蚀剂等。
Hangzhou Huoti corrosive media processing. Eliminate the corrosive medium, such as frequent Kaijing metal equipment, precision instruments placed desiccant and a small amount of the corrosive medium can slow down the corrosion rate of corrosion inhibitor.