1、将重庆升降平台待安支架运至规定的地点，按操作规程要求将车盘停稳、支牢后，分别卸掉支架车固定的连接装置，前面用卸车的绞车曰绳拉向支架底座前方，待所有人员撤离到安全地点后，开动绞车，将支架沿卸车斜台拖下车盘。
Wenzhou lifting platform will be transported to the required safety stand location, follow the rules and parked the car plate, posterior branch in prison, respectively, remove the bracket car fixed connection device, said front winch with unloading hove to stand in front of the base, after all personnel to evacuate to a safe place after starting the winch, the bracket along the unloading ramp dragged off the disk.
   
2、利用工作面安设的回柱绞车，拖拉住温州升降平台支架不同部位进行前移、调向，最后将支架拖正就位，拆掉支架与绞车的绳栓。对各部销子、螺栓进行检查、紧固，清理工具，缩回绞车钢丝绳。
Use Face install the winch, lifting platform bracket drag Wenzhou live in different parts of forward, adjust to, and finally stand being dragged into place, and remove the bracket and bolt rope winch. For ministries pins, bolts checked, tightening, cleaning tool, retract winch rope.
   
3、接通升降平台支架进、出液管路，检查无误后即可送液，将支架前、后立柱升起，并及时调整立柱加长段，待升平前梁后，伸出防片帮板，支架达初撑力后，将手柄恢复零位，最后将框架推出，用连接耳与液压升降机刮板输送机相连。
Wenzhou lifting platform bracket turned into and out of fluid piping, check and correct solution to feeding the front bracket, rear pillar rises, and adjust the column lengthened segment, to be Shengping front beam, extending anti-spalling board, stand up setting load, it will handle the recovery zero, and finally the framework introduced by connecting the ear and connected to a hydraulic elevator scraper conveyor.