重庆升降机液压系统试压的目的主要是检查系统、回路的漏油、控制装置和耐压强度。系统的试压一般都采取分级测试。每升一级，检查一次，逐步升到规定的实验压力，这样可以有效避免事故发生。下面给大家介绍一下升降平台液压系统试压应该注意什么？

1、升降平台试压时系统的安全阀应调到所选定的实验压力值，在向系统打油时，应将液压系统的放气阀打开，待其空气排除干净后，方可关闭，同时将节流阀打开。
Hangzhou valve lift platform pressure test system should be transferred to the chosen experimental pressure when the system Dayou, you should open the release valve of the hydraulic system, let it be excluded clean air only after the close, while the throttle opening.

2、升降平台如果在测试时，系统中出现异声时，应立即停止，待查出原因并排除后，再进行测试。
Hangzhou lifting platform, if at the time of the test, different sound occurs when the system should be immediately stopped, and the exclusion of reason to be identified, and then tested.

3、升降平台测试时，必须注意安全措施，并制定相应的预案。
Hangzhou lifting platform test, you must pay attention to safety measures, and to develop appropriate plans.