圆锥配合是指通过相互结合的内、外圈锥规定的轴向位I来形成间旅或过盈。必须控制内外圆锥的圆锥角偏差和形状误差，基面的距离变化应控制在允许的范围内。圆锥配合不是单一尺寸配合，影响圆锥配合精度的不仅仅是目锥直径尺寸误差.而且还有圆锥角误差。
Wenzhou cone refers to the formation of complexes between the trip through the inner and outer cone specified axial position I mutually binding or interference. Must be controlled inside and outside the cone angle of the conical shape error and the deviation from the variation of the base surface should be controlled within the allowable range. Tapered fit with not a single dimension,affecting not only the accuracy of the cone with cone diameter mesh size error. But also the cone angle error.  
货梯圆锥配合能保证结合件自动定心，它不仅能使结合件的轴线很好地效合，而且经多次装拆也不受影响。在配合中，通过调整内、外圈锥的轴向相对位工，可以改变其配合间晾或过盈的大小，得到不同的配合性质。货梯圆锥配合吸密而且便于拆卸，能够传递一定的转矩，甚至可以取代花键结合，使传动结构简单、吸凑。
Wenzhou freight cone with automatic centering pieces combine to ensure that it not only can combine pieces together the axis of good effect, but after repeated assembly and disassembly are also affected. Mating through within the adjustment, the axial relative position of the outer cone of the workers, which can vary between dry or interference with the size obtained with different properties. Wenzhou freight cone with suction dense and easy to disassemble, be able to pass a certain torque, or even replace the spline coupling, so that transmission structure is simple, smoking hash.