液压升降平台的液压油流经各类液压阀时不可避免的存在着压力损失和流量损失，这一部分的能量损失在全部能量损失中占有较大的比重。在此，液压升降平台厂家给您介绍一下影响升降平台的工作效率的四大因素。When the hydraulic pressure of the hydraulic lifting platform flows through all kinds of hydraulic valves, the pressure loss and flow loss are inevitable. Here, the hydraulic lifting platform manufacturers to introduce you to the impact of the efficiency of the lifting platform of the four factors.

1.合理选择液压器。液压升降平台调整压力阀的压力也是降低功率损失的一个重要方面。流量阀按系统中流量调节范围选取并保证其最小稳定流量能满足使用要求，压力阀的压力在满足液压设备正常工作的情况下，尽量取较低的压力。Reasonable choice of hydraulic device. Hydraulic lifting platform to adjust the pressure valve pressure is also an important aspect to reduce power loss. Flow valve in accordance with the system to adjust the scope of flow control and ensure that the minimum stable flow can meet the use requirements, the pressure valve pressure to meet the normal operation of hydraulic equipment, try to take a lower pressure.

2.合理选择液压油。液压货梯的液压油在管路中流动时，将呈现出黏性，而黏性过高时，将产生较大的内摩擦力，造成油液发热，同时增加油液流动时的阻力。当黏性过低时，易造成泄漏，将降低系统容积效率，因此，一般选择黏度适宜且黏温特性比较好的油液。Reasonable choice of hydraulic oil. When the hydraulic oil in the pipeline will flow in the pipeline, it will show the viscosity, and the viscosity is too high, will produce a larger internal friction, resulting in oil heating, while increasing the resistance of oil flow. When the viscosity is too low, easy to leak, will reduce the volume of the system efficiency, therefore, the general choice of viscosity and viscosity temperature characteristics of good oil.

3.另外，当液压货梯的油液在管路中流动时，还存在着沿程压力损失和局部压力损失，因此液压升降平台设计管路时尽量缩短管道，同时减少弯管。In addition, when the hydraulic cargo ladder oil flow in the pipeline, there is also the pressure loss along the way and the local pressure loss, so the hydraulic lifting platform designed to shorten the pipeline pipeline, while reducing the elbow.

4.保证液压升降平台工作环境的电压稳定。电压不稳定会烧坏操作箱里面的各类电器元件，是升降设备无法收到控制，其次是频繁的电压不稳定会直接烧坏动力单元中的电机，电机烧毁导致的后果是非常严重的，会导致压力瞬间降低，导致事故的发生。Ensure the voltage stability of the hydraulic lifting platform. All kinds of electrical components, voltage instability will burn out the operation box, lifting equipment is unable to receive the control, followed by frequent voltage instability will burn out the motor directly in power unit, the motor burned consequence is very serious, will cause the pressure decrease, leading to the occurrence of the accident.