升降货梯以其操作简便，能轻松实现货物的上下运输，省时省力等优点，被广泛运用社会生产生活的方方面面。那么导轨式与剪叉式升降货梯有哪些区别呢？

导轨式升降货梯和剪叉式升降货梯，从名称上就看出两者区别了，导轨式升降货梯主要是以重型链条传动，油丝绳做保险，设置的安全装置要比剪叉式升降货梯多得多，多重开关保护和断电保护，让导轨式升降货梯的安全系数要比普通货梯高上很多。导轨式升降货梯适用于升降高度比较高的场所，在地坑方面 也不用挖很深的地坑，如果不能开挖地坑的地方也可以转这款升降货梯，例如在二楼装液压升降货梯，不能开挖地坑，在平面上装好之后，自身高度在100-300mm之间，如果往上拉搬运车的话，可以做个坡道，这样既节省了地坑的难题和费用，也达到了客户的需要。
Rail cargo lifter and scissor lift freight elevators, from the name to see the difference between the two, and rail cargo lifter mainly heavy chain drive, oil rope for insurance, provided safety devices than scissor lift freight much more multi-switch protection and power protection, so that rail cargo lift safety factor higher than the average freight on a lot. Rail cargo lifter applies to the height of a relatively high place in the pit also do not dig deep pit, if not the excavation pit where you can also turn this cargo lifter, for example, on the second floor mounted hydraulic lift freight elevator not excavated pit, after a good flat tops, their height between 100-300mm, if the van pull up, you can make a ramp, thus saving pit problems and costs, also reached customer needs.

剪叉式升降货梯上升平稳，结构比较牢靠，故障出现率较低，导轨式的上升高度要比剪叉式的高出很多，维护量比剪叉式的少，但是客户在选择上面要根据现场实际情况来选择。剪叉式升降货梯是属于多叉式组合而成的升降机，一般来说自身高度比较高，而且在升降高度方面，升降幅度太高的场所不适合做剪叉式升降货梯，从而证明了剪叉式升降货梯在货装卸小车的话需要跟地面是平的，就要下挖很深的地坑，这样安装好之后太能跟地面是平的。
Scissor lift freight rose steadily, the structure is solid, low failure rate, increased rail height higher than the Scissor much maintenance is less than scissors, but customers in the selection according to the above site The actual situation to choose. Scissor lift freight belongs to multi-fork-lift combination, in general, their height is relatively high, but also in terms of lifting height, lifting magnitude too high places is not suitable for scissor lift freight elevators, thus proving Scissor cargo loading and unloading cargo lifter in the car if needed with the ground is flat, we must dig deep pit, then so too sorted installed ground is flat.