升降机使用中会出现一些小问题，这些小问题一定要及时找出原因并尽快排除，否则就会影响升降机的正常工作。那么升降平台抖动主要有哪些原因呢？

1、载重面较大，货物的重心一定会有所偏移，加之大台面的设备一般需要配备3个以上的油缸。由于平台的重心问题，所以使油缸受力不均，液压油的入油回油速度必然产生不等。这样平台就可能出现抖动或台面倾斜。
Hangzhou lift platform truck surface is larger, the center of gravity of the goods will be offset, coupled devices generally require large table with three or more cylinders. Since the center of gravity of the issue platform, so uneven force of the cylinder, hydraulic oil into the oil return rate inevitably produce unequal. Such a platform may occur shake or tilt the table.

2、升降平台油质不良也会使油管泵站油缸内的压力不平衡，也会引起台面的问题。或长时间使用的油质产生问题，或油质中混入了别的东西。油质变坏后，油管内可以产生微量的堵塞，这样油缸内的压力就不一样，升降速度也一定受影响。
Hangzhou lifting platform also cause adverse pressure oil pipeline pumping station tanks imbalance can also cause problems countertops. Oily or prolonged use of a problem, or oil mixed with something else. After the oil qualitative bad, can produce micro tubing blockage, the pressure inside the cylinder so that is not the same, lifting speed will certainly be affected.

3、电源电压不符合升降机运转需要，继电器会出现间断接触现象，导致升降机升降间断，应及时调整输入电压，升降机的转动部分润滑不够也会导致抖动的现象。
Hangzhou lifting platform lifts operating supply voltage does not meet the needs of the relay contact phenomena occur intermittently, causing intermittent lift lifting, should adjust the input voltage, the lift will lead to insufficient lubrication of rotating part of the phenomenon of jitter.